Wolfwhoop Q1-Pro 0.01/25/200/500/800mW Switchable 5.8GHz 37CH FPV Transmitter with Pigtail Antenna and FC Uart Support OSD Configuring via Betaflight Flight Controller


Wolfwhoop Q1-Pro 0.01/25/200/500/800mW Switchable 5.8GHz 37CH FPV Transmitter with Pigtail Antenna and FC Uart Support OSD Configuring via Betaflight Flight Controller by Wolfwhoop at Meier Camera. MPN: Q1-Pro. Hurry! Limited time offer. Offer valid only while supplies last. Feartures: All 40 standard channels 5V output for camera LC filter allows ultra clean fpv video 0.01/25/200/500/800mW Switchable VTX with pigtail antenna Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro) 0.01mW-Power up and test your system during a race with zero interference Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera 0.01mW-Power up and test your fpv system


Wolfwhoop Q1-Pro 0.01/25/200/500/800mW Switchable 5.8GHz 37CH FPV Transmitter with Pigtail Antenna and FC Uart Support OSD Configuring via Betaflight Flight Controller by Wolfwhoop
4.5 out of 5 stars with 60 reviews
Condition: New
Availability: In Stock
$16.99


Quantity:  

 


Product Description & Reviews

Feartures: All 40 standard channels 5V output for camera LC filter allows ultra clean fpv video 0.01/25/200/500/800mW Switchable VTX with pigtail antenna Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro) 0.01mW-Power up and test your system during a race with zero interference Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels LED display for indicating CH/Band/Power Specifications: Operating Voltage: 7 - 24V Power supply: 5V camera@under 0.3A max Output power: 25mw: 100mA @12v 200mw: 180mA @12v 500mw: 250mA @12v 800mw: 300mA @12v Range: Up to 4km with omnidirectional RHCP antennas Antenna type: pigtail antenna Antenna connector: SMA Female Video Format: NTSC/PAL Port connector: JST,6pin Dimensions: 26(H)x19(W)x8(D)mm Weight:6.7g(with pigtail antenna)Note : 5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action. 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.

Features & Highlights

  • Just solder an SMA pigtail to it. less signal loss without connector.
  • 0.01/25/200/500/800mW Switchable VTX with pigtail antenna
  • Support parameter remotely adjusted by Betaflight, flight controller, OSD
  • 2S-6S input power supported, 5V output for camera
  • 0.01mW to prevent adjacent channel interference, Integrated Uart, connectable to betaflight FC

Additional Information

Brand:
Wolfwhoop
Manufacturer:
Wolfwhoop
Category:
Video Transmission Systems
Model:
3216562942
MPN:
Q1-Pro
Part Number:
Q1-Pro
Publisher:
Wolfwhoop
Package Weight:
0.06 pounds
Package Size:
2.64 x 0.91 x 4.33 inches

 


Have questions about this item (Q1-Pro), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Wolfwhoop, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


2x4 HDMI 1.4V Matrix Switch/Splitter (2 Input, 4 Output) with Remote Control and IR Extension Cable, Supports HDMI 1.4, 3D, 1080p, 4K x 2K
mpn: PN1, ean: 0641926123895,
The hdmi switch/splitter is a product which can distribute HDMI signal without loss to up to 4 display device such HDTV. Features: - Excellent Quality 2 HDMI 1.4 input signal split to 4 sink devices HDCP protocol compliant Support deep color 48bit Su...

Funlux 720p HD Outdoor Home Wireless Security Surveillance Video Camera System (1 Pack)
mpn: 4332025296, ean: 0889490011648,
Funlux Outdoor Wireless Camera This wireless home security camera can meet all your needs to check on your home, kids, pets or business anywhere and anytime. Quick and easy setup with Latest connection technology. View video remotely using your smar...

BV-Tech Converter IP Over Coax max 3000ft POE Power and Data Transmission Over Regular RG59 coaxial Cable
mpn: CON-LR100-ECET, ean: 0811853030980,
- Converts between a PoE signal and Enhanced Power over Ethernet technology. - Convert signals between coaxial cable and CAT5E/CAT6 Ethernet cable. - These extenders allow non ePoE-enabled devices to take advantage of the long transmission distances ...

5 Pairs Passive Power Video Power Balun Audio BNC to RJ45 Connector HD-CVI/TVI/AHD/CVBS Transceiver for 720P UP to 8MP for CCTV Security Surveillance Camera System
mpn: IPCA07, ean: 0745499374484,
--Material:PVC + Zinc alloy + Copper --Interface: RJ45+DC+BNC+RCA (Audio) Interface --Maximum Supported Pixel : 1080P , 8 Million Megapixels (8MP) --Transmission Distance: 720P CVI/AHD / CVBS Max.984ft ; 1080P CVI/TVI/AHD Max. 656ft. --Features:S...



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - meiercamera.com. All Rights Reserved.